Sedan Slick top 3 watt 360 bundle

Welcome to the high performance Swift 3.0 TIR 6 Grille Led surface mount LED light head. Using the state-of-the-art Gen 4 LED technology it illuminates a powerful ray of light, which can be seen in any direction even in clear daylight. Fully encapsulated and fully waterproof, all LED modules and flasher boards are epoxy coated, keeping it harmless from all weather conditions. Each LED unit uses six 3 watt LEDs with colors flashing simultaneous or alternating with 22 different patterns. They can be synchronized to work together with many other LED modules. The size of these light heads allows them to be mounted in several locations such as: grilles, bumpers, dash and deck. 

Flash Patterns: PA1. Quad Burst - Split PA2. Quad Burst - All PA3. Quad Burst – Alternating* PA4. Quad - Split PA5. Quad - All PA6. Quad – Alternating* PA7. Single - Split PA8. Single - All PA9. Single - Alternating* PA10. Super Flash - Split PA11. Super Flash - All PA12.  Super Flash - Alternating* PA13. Quad/Single w/ Quad Burst - Split PA14. Quad/Single w/ Quad Burst PA15. Accelerator - Split PA16. Accelerator - All PA17. Express Flash PA18. California Steady with Pulse PA19. California Steady PA20. Steady All PA21. Cycle Flash – Split & All PA22. Off

• Generation 4 LED surface mount lighthead
• Weather and vibration resistant
• Self-contained 22 patterns
• Alternating or simultaneous flashing
• 4 wires for simple set-up - 1 pos, 1 Neg, 1 sync and 1 pattern
• Voltage: 12-24 VDC
• 6 3watt LED elements
• Average current draw: 500mA@12.8 VDC
• Max current draw: 700mA@12.8 VDC
• 5.1" wide x 1.1" high x 0.8" deep
• Patent Pending
• 3 year manufacturer defect warranty

The Nighthawk LED SIDE RUNNING BOARD SYSTEM package is an extremely versatile emergency lighting system designed for maximum visibility with minimal footprint. Our Running Board Leds were developed to enhance the outline of a vehicle’s profile (side of vehicle), offering greater visibility through installation location, variable flash patterns and lighting intensity. Made of super-bright, 3 Watts LEDs, high-impact housing and black finished aluminum mounting sleeve all support a great light with stealth installation. 

• • Extremely versatile emergency lighting system
• • Voltage: 12V
• • Super-bright 3 watt LEDs
• • Built in waterproof driver
• • 15 different flash patterns
• • Anodized black finished aluminum
• • Weight： 30 lbs
• • Size： 60in Lx 2in W x 1.5in H
• • 3 year manufacturer defect warranty.

This Warning Stick is a great solution for rear back deck lighting and can also perfect for installation on front headliners, mounting in your grill or anywhere else you would like to have slim line discreet lighting. It is a very low profile unit, which produces high intensity lighting using Generation 4 3W TIR Technology designed with an outstanding and most up to date microprocessor circuit that facilitates low power consumption. Using the state-of-the-art Gen4 3W LED technology it illuminates a powerful ray of light, which can be seen in any direction even in clear daylight. The Traffic advisor comes standard with 2″ Brackets, suction cups, ON/OFF switch on the cigarette plug as well as a sync wire, to sync more than one unit together. They have the ability to synchronize with or without the cigarette plug and can be hardwired to your own switch box as well. They are Waterproof and can be used for interior or exterior use. Additionally, it has been tested against Vibration, moisture, and corrosion.

• Generation 4 3W TIR LED technology
• Voltage: 12 VDC
• Current Draw: 0.35 amps per head @12VDC
• Features more than 15 flash patterns
• Built in waterproof driver
• Aluminum frame
• 2″ Bracket with suction cups
• Push button for pattern selection on cigarette plug
• ON/OFF switch on cigarette plug
• 3 year manufacturers defect warranty
• Size： 29in L x2in W x 1.5in H

Slicktop emergency vehicle package